Round Shank Bits, Coal Mining Picks & Foundation Drilling Tools — China Sourcing

SourcingProChina is a China-based sourcing agent specializing in tungsten carbide tipped cutting tools for the mining, tunneling, and road construction sectors. If you've dealt with premature tip wear, shifting lead times, or a factory that quietly changed specs after your deposit cleared, you already know why buyers use a sourcing agent instead of cold-contacting a manufacturer directly. We work with a vetted network of factories across China producing round shank bits, coal mining bits, foundation drilling tools, trenching tools, road cutter bits, and road milling teeth, and we handle the parts most buyers struggle with on their own: factory verification, spec confirmation, quality inspection, and export logistics — so you get the right tool, at the right spec, without managing the supply chain yourself.

What We Source For You

Conical Cutting Picks (Round Shank Bits)
Press-fit tungsten carbide–cobalt (WC-Co) tip on a high-tensile alloy steel body. The conical profile self-rotates during operation, spreading wear evenly across the tip rather than concentrating it on one face — which is the main reason these outlast flat-ground alternatives in coal seam, mixed-face, and rock-cutting conditions. We source these individually or as full assemblies.

Pick Holders (Block / Sleeve)
Forged from high-manganese or alloy steel, with a bore pocket held to tight shank tolerance so the pick seats correctly and doesn't work loose under repeated impact. Available in weld-on and bolt-on configurations depending on your drum design.

Retaining Rings (Snap Ring / Locking Ring)
Spring-steel clips that seat into the shank groove to keep the pick from ejecting under high-frequency percussion loads, and to cut down vibration transfer into the holder block. Small part, but a common point of premature failure if the wrong grade is used — we confirm spring steel spec before ordering.

Foundation Drilling Tools & Rotary Bits
For rotary drilling rigs, foundation augers, and diaphragm wall equipment, we source rotary-series carbide bits engineered for hard-formation drilling in piling, geotechnical boring, and urban foundation work.

Trenching Tools
Carbide-tipped cutting components for trenchers and chain-type digging equipment, sourced to the shank and tip spec your machine requires.

Road Cutter Bits & Road Milling Teeth
For scarifiers, cold planers, and milling drums used in bridge deck maintenance, highway resurfacing, and industrial floor preparation. We source both standard stock dimensions and custom-geometry bits engineered to fit or replace OEM tooling on major planer and milling platforms.

Specifications We Confirm Before You Order

Exact dimensions vary by machine and application, so rather than quote you generic numbers, we confirm the following against your machine model or OEM part number before sourcing:

We verify these against test reports before shipment — not just the factory's spec sheet. See "How We Protect Your Order" below.

Compatible Machinery

Our factory network produces tooling engineered to fit — or directly replace — OEM parts across major equipment platforms, including:

• Coal shearers and continuous miners (longwall/shortwall drums, room-and-pillar development)
• Roadheaders (boom-type and transverse, mixed-face and hard-rock tunneling)
• Rotary drilling rigs and foundation augers (piling, diaphragm wall, geotechnical boring)
• Tunnel boring machines (TBM) (custom gauge and face picks for metro, highway, and hydroelectric projects)
• Walk-behind scarifiers, ride-on planers, and drum-type grinders (industrial floor prep, bridge deck maintenance, airport apron scarification)
• Trenchers and pile-driving equipment

Not sure which series or shank spec fits your machine? Send us your model number, OEM part number, or a drum/drawing reference, and we'll cross-check it against our factory network's interchange data before you commit to an order.

How We Protect Your Order

Buying cutting tools from an unfamiliar Chinese factory carries real risk — misrepresented carbide grade, skipped hardness testing, or a "sample-quality" batch that doesn't match the bulk shipment. As your sourcing agent, we sit between you and the factory specifically to close those gaps:

• Factory vetting — we work only with manufacturers holding ISO 9001:2015-compliant production processes, and we check production capacity before recommending a factory for your volume.
• Batch-level testing — carbide tip hardness (HRA ≥89.5), body hardness (HRC 48–55), and brazing pull-force testing confirmed before your order ships, not just on request.
• Independent inspection available — we can arrange third-party pre-shipment inspection (SGS, BV, or an inspector you nominate) so you're not relying solely on the factory's own QC.
• Documentation — material test reports (MTR), dimensional inspection reports, and MSDS collected and passed on to you with the shipment.
• OEM / private-label coordination — custom part numbering, logo marking, and packaging artwork managed with the factory on your behalf.
• Logistics handled — export packaging, FOB / CIF / EXW terms, and freight arrangement, with support for first-time importers navigating the paperwork.

Who We Work With

We source for infrastructure contractors, mining equipment MRO buyers, drum fabricators, and equipment distributors across North America, Europe, the Middle East, Southeast Asia, Africa, and Australia — including buyers building their own private-label tooling brand and buyers simply looking for a more reliable alternative supplier after a bad experience with a previous factory.

Frequently Asked Questions

Q1: What is your MOQ for a first trial order, and can I get samples before committing to bulk?

As a sourcing agent, we work with multiple qualified factories rather than a single production line, which gives us more flexibility on trial quantities than going direct to one manufacturer. For most round shank bits and coal mining picks, factory-standard MOQs run from 100–200 pcs per model, but we can often negotiate mixed-model sample sets (5–10 pcs per model) for serious buyers who want to evaluate carbide grade and fit before scaling to a container order.

Q2: How do I know the carbide grade and steel body actually match what's on the spec sheet — how do you prevent supplier fraud?

This is exactly the risk a sourcing agent is meant to remove. We don't take a factory's word for it — we require carbide tip hardness testing (HRA ≥89.5), body hardness verification (HRC 48–55), and brazing pull-force test reports for every batch before it ships, and we can arrange independent third-party inspection (SGS, BV, or an inspector of your choice) at the factory gate. You get the test documentation and material certificates (MTR) alongside your shipment, not just a sales promise.

Q3: Can you source round shank bits, foundation drilling tools, and road milling teeth that fit our existing machine — even if it's a Western brand?

Yes. Send us your machine model, OEM part number, or a dimensional drawing, and we cross-reference it against the factories in our network that manufacture to the matching shank tolerance and holder geometry — whether that's for coal shearers, roadheaders, rotary drilling rigs, or planer/scarifier drums. We handle the technical back-and-forth with the factory so you're not stuck translating drawings yourself.

Q4: What if our regular supplier's lead time keeps slipping, or we want to compare alternative Chinese factories without starting from zero?

That's one of the main reasons buyers come to us. Because we already have vetted, audited factories across carbide cutting tool categories — trenching tools, coal mining bits, road cutter bits, foundation drilling tools — we can shortlist 2–3 alternative, capacity-checked manufacturers for you quickly, rather than you cold-sourcing and re-vetting a new supplier from scratch after a delay.

Q5: Do you support OEM / private-label branding, and how does customs/logistics work if we've never imported from China before?

Yes — we coordinate custom part numbering, logo engraving or marking, and private-label packaging with the factory on your behalf, and most producers in our network accept OEM branding at 500 pcs/SKU or negotiate lower for repeat buyers. On the logistics side, we manage export packaging, FOB/CIF/EXW terms, and freight coordination, and can walk first-time importers through the paperwork so nothing gets held up at your port.

Request a Quote

Tell us your machine model, required dimensions or OEM part number, and estimated order volume — we'll come back with factory-verified pricing, lead time, and shipping terms, typically within 24 hours. Request a Quote →